For the cooling system to work perfectly, it must be at a certain level that you must check constantly. The coolant or water boils every time you use the car; that is why it is essential to check the water pump because if it does not have the correct amount, the engine will start to overheat and run the risk of melting. To do this, do the following:
Open the car’s hood and locate the radiator cap near the front of the vehicle. When you find it, you will see a warning sign that will notify you never to open the cap when it is hot. Never touch the cap when the car is running or has been running recently. The engine must be warm or cold before you can feel the water cap.
Use a rag to twist the radiator cap with your hand. This will help protect you from the heat and give you a better grip on the cap.
Look inside the hole to see how much water and antifreeze are inside the radiator. If it’s packed to the top, everything is perfect. If it is lower, you will need to add water and antifreeze. You must add both in equal parts.
Measure The Brake Fluid Level
Brake fluid is a hydraulic fluid that makes it possible to transmit the force exerted on the brake pedal to the brake cylinders on the wheels. Anyway, it is one thing that allows you to brake your car. This is how you should measure its level:
Find the brake fluid reservoir located on the brake master cylinder. The cylinder is located at the rear of the engine on the vehicle’s driver’s side. A lid covers that tank.
Check the level of the brake fluid in the cylinder. You will see that the reservoir is identified with the high- and low-level lines marked. Just look at where the brake fluid is compared to the level markers.
If it is low, add a little, but do not exceed the level. Finally, close the lid tightly. Check for how to buy car plate numbers (ซื้อ ป้าย ทะเบียน which is the term in Thai)
